Global Support for Professionals
The camera focuses using 153 focus points, of which the 55 shown in red at right can be selected by the user. The available cross sensors and focus points vary with the lens or teleconverter used (see this section ).
The center focus point can be selected by pressing the center of the multi selector. See this section for information on choosing the number of focus points available. See this section for information on configuring focus-area selection to “wrap around”.
1.3× (18 × 12)
The focus points at the left and right edges of the display are not available when 1.3× (18 × 12) is selected for Choose image area. Instead, the camera focuses using 117 focus points, of which 45 can be selected by the user. If another focus point is active when 1.3× (18 × 12) is selected, focus will move to the closest available point. The previous selection will be restored if the user chooses another image area option without changing the focus point.
The focus points with cross sensors are highlighted in green. All other focus points use line sensors.
Lens | Cross sensors |
---|---|
AF‑S lenses other than those listed below with maximum apertures of f/4 or faster * |
|
|
|
|
|
* At maximum zoom, in the case of zoom lenses.
The focus points shown below are available for autofocus and electronic rangefinding when a teleconverter is used. Cross-sensor focus points are highlighted in green.
Teleconverter | Max. lens aperture |
Focus points |
---|---|---|
|
f/2 |
|
TC‑14E/TC‑14E II/TC‑14E III |
f/2.8 | |
|
f/2.8 |
|
TC‑14E/TC‑14E II/TC‑14E III |
f/4 | |
TC‑17E II |
f/4 |
|
TC‑800‑1.25E ED |
f/5.6 | |
TC‑20E/TC‑20E II/TC‑20E III |
f/42 |
|
TC‑14E/TC‑14E II/TC‑14E III |
f/5.62 |
The focus points available for autofocus and electronic rangefinding when teleconverters are used in combination with different lenses are shown below (data are current as of April 2016).