If you have previously connected to a network, you can disconnect or reconnect at the push of a button by using Custom Setting f1 (see this section) to assign Connect to network to the Fn1, Fn2, Fn3, or Pv button. Pressing the selected button will display a network connection dialog.
Connection status is shown by the network indicator on the back of the camera. This contrasts with earlier cameras, which showed connection status in the network menu only.
| Network indicator | Status |
|---|---|
| (lights green) | Waiting for connection. |
| (flashes green) | Connected. |
| (flashes amber) | Network error. |
| (off) | Network connection disabled or Ethernet cable not connected. |
