Technical Solutions | Z 7II/Z 6II TIPS

Subject-Tracking AF

For subject-tracking AF, we recommend that you choose a focus mode of AF-C and an AF-area mode of [Auto-area AF], [Auto-area AF (people)], or [Auto-area AF (animals)]. Once tracking starts, focus will follow the subject through the frame while the AF-ON button is pressed or the shutter-release button is pressed halfway.

To start subject-tracking AF, press .

Position the focus point as desired.

Wait until the chosen focus point is over your subject and then either press the shutter-release button halfway or press the AF-ON button: the focus point will turn yellow and the camera will track the subject until the chosen button is released. Subject tracking can also be started by pressing or tapping your subject in the display.

To suspend subject tracking and restore the focus point selected before tracking started, lift your finger from the shutter-release or AF-ON button. If you started subject tracking by pressing or by tapping your subject in the display, you can press to suspend tracking and select the center focus point.

To end subject-tracking AF, press ().

Custom Subject-Tracking Controls

You can use Custom Setting f2 [Custom controls] to assign [Subject tracking] to the Fn1 or Fn2 button on the camera or to the Fn or Fn2 button on the lens. If you press the selected button when [Auto-area AF], [Auto-area AF (people)], or [Auto-area AF (animals)] is selected for AF-area mode, the camera will enable subject-tracking AF and switch to a target-selection display.