The “View Settings” Dialog

The view settings (settings confirmation) dialog can be used before auto capture is initiated to check whether the selected criteria perform as desired.

Subjects detected by the camera are shown by green boxes in the settings confirmation dialog.

If an option other than [Auto-area AF] is selected for AF-area mode, you can choose the focus point.
If [Wide-area AF (C1)] or [Wide-area AF (C2)] is selected for AF-area mode, you can choose the size of the focus area by holding the focus mode button and pressing 4, 2, 1, or 3.
The AF-area mode can be selected from the settings confirmation dialog by pressing the focus mode button and rotating the sub-command dial.
If green boxes are not displayed as expected, press the i button to return to the auto capture settings display and choose new trigger criteria.

The “View Settings” Standby Timer

The [View settings] display will turn off automatically when the time selected for Custom Setting c3 [Power off delay] > [Standby timer] expires. Choose a longer standby timer if required.